您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 17626.17-2005 电磁兼容 试验和测量技术 直流电源输入端口纹波抗扰度试验

时间:2024-05-11 23:10:03 来源: 标准资料网 作者:标准资料网 阅读:9242
下载地址: 点击此处下载
基本信息
标准名称:电磁兼容 试验和测量技术 直流电源输入端口纹波抗扰度试验
英文名称:Electromagetic Compatibility—Testing and measurement techniques—Ripple on d.c. input power port immunity test
中标分类: 电子元器件与信息技术 >> 电子元器件与信息技术综合 >> 电磁兼容
ICS分类: 电信、音频和视频技术 >> 电磁兼容性(EMC) >> 抗扰性
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2005-02-06
实施日期:2005-12-01
首发日期:2005-02-06
作废日期:1900-01-01
主管部门:国家标准化管理委员会
提出单位:国家经济贸易委员会电力司
归口单位:全国电磁兼容标准化技术委员会
起草单位:国家电力公司武汉高压研究所
起草人:万保权、张小武、邬雄、蒋虹、王勤、张广洲
出版社:中国标准出版社
出版日期:2005-06-23
页数:16开, 页数:11, 字数:20千字
书号:155066.1-23123
适用范围

本部分规定了电气和电子设备的直流电源输入端口的纹波抗扰度试验方法。本部分适用于由外部整流系统或正在充电的蓄电池供电的设备的低压直流电源端口。本部分的目的是建立一个通用的和可重现的基准,以在试验室条件下对电力和电子设备进行来自于如整流系统和/或蓄电池充电时叠加在直流电源上的纹波电压的抗扰度试验。本部分规定了:——试验电压的波形;——试验等级范围;——试验发生器;——试验配置;——试验程序。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 电子元器件与信息技术 电子元器件与信息技术综合 电磁兼容 电信 音频和视频技术 电磁兼容性(EMC) 抗扰性
Product Code:SAE J2123
Title:Numbering System for Taps
Issuing Committee:Cutting Tool Task Force
Scope:This SAE Recommended Practice provides a systematic method for the identification of ground thread taps for inch sizes up to 9.999 in with a Maximum Thread-per-Inch of 99.9, and Metric sizes up to 99.9 mm with a Maximum pitch of 9.99 mm. It is intended to assist in the cataloging and supplying of these tools. It is not intended for ACME, Buttress, or similar type thread forms.NOTE 1聴Caution must be taken when assigning codes to prevent specifying taps that cannot be physically or economically manufactured.NOTE 2聴The Code Number coming from the manufacturer MUST reflect the actual tool construction.NOTE 3聴 In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.